Case Studies

Custom gifts, delivered from sketch to shipment.

A selection of projects across metal products, phone stands and caps. Each case shows the brief, the solution, the quantity and what made delivery reliable.

24 h
Proposal and quote after inquiry
3–15 days
Sample lead time by complexity
1 line
Same line and parameters, sample to mass production

All client details are anonymized to protect confidentiality.

City Marathon Finisher Set: custom medal, lanyard and embroidered caps for a European charity run

Case 01 · Medal · Lanyard · Caps

City Marathon Finisher Set

Client: International event organizer, Europe (anonymous)

Project Overview
A charity marathon needed one team to look unified before the race and one medal to wear the moment runners crossed the line. We built a single set around the medal, with a woven lanyard and team caps as supporting pieces.
Client Need
The gradient city skyline had to survive die-casting with its fine lines intact. The medal had to be wearable straight away, so the lanyard was part of the design, not an add-on. The caps had to match the event colors exactly.
Custom Solution
Zinc alloy die-cast medal with soft enamel, multi-layer color fill and antique gold plating. Gradients were rebuilt as stepped color fills, which we flagged at the quoting stage. Custom woven lanyard cut to the medal ring. Caps with computer embroidery, with logo position and thread colors confirmed on a sample before production.
Quantity
Medals 2,000 pcs · Caps 800 pcs · Lanyards 2,000 pcs
Delivery Highlights
Sample in 7–10 days. Mass production ran on the same line and plating bath as the approved sample. One window handled artwork approval, inspection and a single consolidated shipment, with photos shared before dispatch.
Trade Show Desk Gift Kit: custom phone stand, hard enamel pin and die-cut scent card

Case 02 · Phone Stand · Pin · Scent Card

Trade Show Desk Kit

Client: Consumer electronics brand, North America (anonymous)

Project Overview
A show-and-visit kit that works after the booth closes. The phone stand stays on the desk, the pin travels on a bag, and a die-cut paper scent card hangs in a car or wardrobe for the following weeks.
Client Need
The stand had to sit on a desk every day, so a stable hinge, a smooth open-and-close feel and a clear logo position all mattered. The pin had to be small and light. The scent card had to follow the brand shape, with a fragrance that suited the season.
Custom Solution
Metal stand with a tested hinge structure, laser-engraved logo and a printed insert. Hard enamel pin with a butterfly clutch in a matching color. Paper scent card die-cut to the logo, printed on both sides and sealed in an individual bag, with fragrance chosen from our standard library. Lanyard and bag came from the scent card supplier.
Quantity
Stands 500 pcs · Pins 1,000 pcs · Scent cards 1,000 pcs
Delivery Highlights
Hinge and load checks before production. The scent card was timed backwards from the show date to protect fragrance life, with a batch retention sample kept for re-checking. Packed per attendee and delivered to the exhibition hall ahead of the deadline.
Museum Heritage Souvenir Series: custom hard enamel pin, tote bag, mug, cap and scent card gift kits

Case 03 · Pin · Tote Bag · Mug · Scent Card · Baseball Cap

Museum Heritage Souvenir Series

Client: National museum gift shop, Europe (anonymous)

Project Overview
A souvenir series for a museum exhibition on ancient bronzes. The collectible metal pin is the main piece. A canvas tote bag, a ceramic mug, a baseball cap and a die-cut scent card in the shape of the exhibit are the supporting pieces, so visitors can take home one object to collect, carry, use, wear and smell. The pieces are sourced together under one project, and the gift shop can sell the pin on its own or any piece as part of the series.
Client Need
The museum wanted the fine pattern lines and the aged bronze tone of the artifact reproduced faithfully, and a series that could be shelved in the gift shop at several price points. The pieces had to look like one family across metal, fabric, ceramic and paper, and the scent card had to be refreshed for each new exhibition without new tooling.
Custom Solution
Hard enamel pin with 3D relief, antique bronze plating and a numbered back stamp for the limited edition. Cotton canvas tote bag with a screen-printed artifact motif and a woven label, sourced with the pin in the same project. Ceramic mug with a full-wrap print of the exhibit pattern, with print color checked on a sample. Cotton twill baseball cap with computer embroidery of the artifact mark, with logo position and thread colors confirmed on a sample. Paper scent card die-cut to the artifact outline, printed on both sides with a spot color and gold foil, with a woody fragrance from our library named after the exhibition. The scent card carried its batch number and recommended use-by period on the bag. Each piece was packed on a printed museum card or in a printed sleeve.
Quantity
Pins 800 pcs · Tote bags 600 pcs · Mugs 500 pcs · Caps 400 pcs · Scent cards 1,500 pcs
Delivery Highlights
Pattern reproduction on the pin was checked on a sample from the same line and plating bath as production, with the antique tone approved against a plated master. The tote bag, mug and cap were sourced as supporting pieces and went through the same four checks on process, cost, lead time and documents, with one consolidated artwork approval, inspection and shipment. Scent cards were timed backwards from the exhibition opening, with a batch retention sample and a replenishment cycle agreed for later exhibitions. Nickel release, fabric, ceramic food-contact and fragrance documents (IFRA and SDS) were prepared before shipment.
Music Festival Fan Merchandise Pack: custom embroidered cap, soft enamel pin and bottle opener gift kits

Case 04 · Caps · Pin · Bottle Opener

Music Festival Fan Pack

Client: Festival organizer, Australia (anonymous)

Project Overview
A merchandise pack for a three-day outdoor music festival. The embroidered cap is the main piece, worn on site all weekend. A collectible pin and a bottle opener are the supporting pieces, one for keeping and one for using at the bar and campsite.
Client Need
The caps had to be comfortable in the sun, with sharp embroidery on a textured fabric and a fit that worked for most heads. The opener had to be sturdy enough for real use. The pack had to be ready before ticket sales opened, with a clear plan for selling out and restocking.
Custom Solution
Cotton twill cap with computer embroidery on the front and a woven label inside, with logo position and thread colors confirmed on a sample. Soft enamel pin of the festival mark with a rubber clutch. Zinc alloy bottle opener with a printed enamel face and a durable finish. A paper scent card was left out, since the festival needed durable merchandise.
Quantity
Caps 1,200 pcs · Pins 1,500 pcs · Openers 1,000 pcs
Delivery Highlights
Sample in 7 days, with the cap fit and embroidery approved before production. Fabric composition and colorfastness documents were prepared for the destination, and the whole pack shipped as one consolidated shipment ahead of ticket launch. A small top-up of caps was added on the same line after the first weekend.
Licensed IP Merchandise Capsule Gift Kit: custom enamel pin, bottle opener, water bottle and scent card

Case 05 · Pin · Bottle Opener · Sports Water Bottle · Scent Card

IP Merchandise Capsule

Client: Independent creator brand, UK (anonymous)

Project Overview
A first product launch for a character IP: a collectible pin as the main piece and a bottle opener for everyday use. A sports water bottle and a die-cut scent card were added as supporting pieces, one for daily use and one as a seasonal piece that can be refreshed without new tooling.
Client Need
Test the market with a small first batch while keeping the quality of a bigger run. The 3D relief character needed strong detail, and the capsule had to cover both collectors and daily users. The sports water bottle had to carry the character artwork cleanly, stay leak-proof in a gym bag and be safe for food contact.
Custom Solution
Pin with 3D relief and multi-color enamel. Bottle opener with a matching zinc alloy body and a durable finish. Stainless steel sports water bottle with a leak-proof lid, finished in a matching color, with the character printed on the body and print color checked on a sample. Scent card die-cut to the character shape, with the fragrance named after the season. The sports water bottle was sourced with the pin in the same project, and went through the same four checks on process, cost, lead time and documents. Sample and tooling fees were itemized and deducted at mass production.
Quantity
Pins 200 pcs · Openers 200 pcs (trial) → 1,500 pcs repeat · Sports water bottles 300 pcs · Scent cards by season
Delivery Highlights
Trial and repeat orders ran on the same production line and plating bath, and colors matched the approved sample. The sports water bottle was handled in the same consolidated artwork approval, inspection and shipment, with leak and print checks on the sample and food-contact documents prepared before dispatch. Scent cards were reordered by batch on a replenishment cycle, with a new fragrance for each season.
Company 25th Anniversary Commemorative Gift Set: custom numbered coin and tie clip gift kits

Case 06 · Commemorative Coin · Tie Clip · Gift Box

Company Anniversary Commemorative Set

Client: Engineering group, Western Europe (anonymous)

Project Overview
A 25th-anniversary gift for long-serving staff and key partners. A numbered commemorative coin is the main piece, with a matching tie clip as the one supporting piece, both presented in one gift box at the anniversary dinner.
Client Need
The coin had to carry the company history in a fine relief and feel substantial in the hand. The tie clip had to match its finish so the two read as one set. The plating had to stay bright for years, and the sense of occasion had to come from craft rather than extra items.
Custom Solution
Brass coin with 3D high relief on both sides, multi-layer gold and antique plating, and an individual number on the edge. Stainless steel tie clip with a matching gold finish and laser-engraved anniversary year. Custom gift box with a fitted insert. No scented items or bottle openers were added, since this set is meant to be kept.
Quantity
Coins 500 pcs · Tie clips 500 pcs · Gift boxes 500 pcs
Delivery Highlights
Plating thickness and acceptance standard were written into the contract, and the tooling and relief depth were fixed before production. Photos from each stage and the final inspection were shared before shipment, and nickel release and REACH documents were prepared so the anniversary date was never at risk.

How Every Case Runs

One window, one standard, from first sample to bulk.

01

Brief & Review

We review artwork, quantity, deadline and destination, and confirm which processes can reproduce your design.

02

Quote & Sample

Sample, small-batch and mass-production prices with lead time within 24 hours.

03

Production

Same line and process parameters as the approved sample, including the plating bath.

04

Inspect & Ship

Consolidated inspection, photos, compliance documents and one shipment.

FAQ

About these case studies

Cases are for reference only and do not represent a quotation. Every project is quoted individually.
Are these cases real projects? +

Yes. They are based on real project types we handle. Client names, brands, logos and any identifying details are removed or generalized to protect confidentiality.

Do the cases show your prices? +

No. Cases are for reference only and do not represent a quotation. Cost depends on material, process steps, size, plating, quantity and destination.

Can you reproduce a similar result for my project? +

In most cases yes. Send your artwork or concept and we will confirm which processes can reproduce it and offer alternatives where needed.

What quantities do you usually handle? +

Mostly project orders from dozens to several thousand pieces. A reasonable MOQ is explained per process in your quote.

How fast can I get a proposal? +

Within 24 hours of inquiry, including sample price, small-batch price, mass-production price and lead time.

Can I only order the main item? +

Yes. Sets are a way to reduce decision effort, not a condition. The main item is quoted by project volume.

Start Your Project

Tell us what you need to build.

Share your artwork, quantity and deadline. You will receive a proposal with sample, small-batch and mass-production pricing within 24 hours.

Your information is kept confidential. Case studies are for reference only and are not a quotation.